Chrome ET Bulge Centric Lug 7/16"

Question

Q: What is the Dia. of the shank and length? My american racing wheel takes a shank with the dia.of .615 and with a washer 5/8" long. The lug nuts are 7/16.

Asked by: Larry Miller - 11/5/2016

Q: What is the O.D. of the extended thread section? Do these also have the 60 degree conical taper?

Asked by: Gary - 8/8/2017

Q: what type lug nuts do i needto fit american torqwheels vn5155861 to go on 1967gto?

Asked by: ron - 4/11/2017

Q: Will the "shank" of these will fit in the hole diameter of .626"?

Asked by: Ross - 10/5/2018

Q: I have a 1968 camaro with American racing torq thrust II chrome. Will your Chrome ET bulge centric lugs 7/16 fit on my car, if so what is part number so I can order?

Asked by: darrell - 3/20/2020

Q: Do the lugs have a 60 degree taper?

Asked by: Peter Hoenck - 11/16/2021

Q: i recently purchased wheels and tires for a 1969 buick gs400.Then i ordered lug nuts a few days later.The second set of lugs are the extended thread type.can i use them for this car

Asked by: james donaldson - 12/1/2021

Q: I bought black torque thrust 15/7 an 15/8 tapered seat an bolt , only about 3 threads grip, I think i need extended bolt if will fit through bolt hole more grip . 55 chevy disc brake front an 12 bolt rear! Help !

Asked by: James M Purnell - 1/15/2022

Q: Will these fit on a torq thrust d rim on a 64 got

Asked by: chris blommer - 5/11/2022

Q: I purchased a full set of VN5155863 wheel for my 70 camaro the studs on the axle are 7/16 Will these work ? also seems the wheels need a larger Bulge or conical to be correct Scott 928 530 3355 or Email.

Asked by: Drdodge - 9/26/2022

Questions about this item? Ask here.

Accepted Answer

A: The shank is 3/8" long. This lug is not meant to be used with a washer. This lug is specifically designed to be used with conical seat lug holes where extra engagement is needed for short studs.

Was this answer helpful? 6 of 6 Customer(s) found this Answer helpful.

Answer provided by: Jeff Roberts (11/7/2016)

Accepted Answer

A: Yes they are standard 60 degree taper. The O.D. of the extended portion is 5/8" which fits standard lug holes.

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Jeff Roberts (8/8/2017)

Accepted Answer

When buying the wheels from Wheelsforless we include the lug nuts so there would be no need to purchase them separately. If you already have the wheels and need lugs this Chrome Centric Bulge Lug 7/16 20-Pack will fit, however, the extended thread is not necessary. Any Chrome Acorn Lug nut will work. Here is the web address to the page of the lug nuts we send with the wheels:

http://www.wheelsforless.com/5452-20

Accepted Answer

A: Yes it does. The diameter of the extended portion is .62".